With Spotmau PowerSuite, No need to reinstall system, boot up any computer directly
There are a lot of problems leading to unsuccessful reboot computer. One of the main reason is that your computer crashed and lost the most important files on your computer system. Your computer locks up, crashes, stalls or otherwise fails to completely boot up into Windows. That's particularly painful, since most all of our diagnostic tools require that Windows be running. Diagnosing the problem with a computer that won't boot can be difficult.
You computer totally blue-screen
tips show that some files lost, you need to recover it
You see "Non-system disk or disk error," or a similar message.
Your computer stops immediately after you turn it on or displays nothing on your monitor.
Your computer does not turn on.
You need to perform a repair installation of Microsoft Windows
... ...
A computer that won't start can be both alarming and infuriating, especially if you're not goot at computer, or you are on a deadline or you haven't been backing up all your data (like we all tend to do). How to fix computer if it won't boot up simple yet professional?
Fix it easilySpotmau PowerSuite 2010 is a powerful computer tool that have a bootable CD built-in. You can use it to boot up any crashed computer. Why Spotmau PowerSuite 2010 can boot any computer? Because it can recover the files your Windows needed from its own bootable CD and back your system to normal. So you can boot up the system easily. Got it? Besides. Spotmau PowerSuite can protected your computer, clone system, backup and recovery any files on computer, find and reset any password.
Spotmau PowerSuite, The most AWESOME CD fix any computer
Spotmau Powersuite 2010 Tool will save you time as well as money
If you are using Spotmau Powersuite 2010 tool to fix the startup problems of your system, then it will save you from expensive technical support services. If you decide to call for a PC technician or even bring your computer to a repair center, it will cost you hundreds of dollars and several days before you get your PC fixed.
Boot up any computer
Speed up your Windows
Find out passwords on computer
Repair Windows problems
Clone your system & data
Protect your computer privacy
Recover data from deleted, crashed, or formatted hard disk
How to boot up computer after crashed?
Spotmau PowerSuite 2010 creates a CD-ROM that provides a full suite of Windows utilities, as well as the ability to boot up your PC and diagnose and fix the problem when Windows doesn’t open.
You can click here to order this powerful software.
Spotmau PowerSuite suppot all Windows includes Windows 7, Windows Vista, Windows XP and Windows 2003.So you can use the Bootable CD to start any Windows computer if your computer have the boot up problem. Such as boot up computer after the PC crashed. Get all your PC files back to your hand and keep them safe.
Spotmau PowerSuite 2010 is the ultimate Windows troubleshooting tool. It is a bootable CD that you can use to solve just about any problem you may experience with a Windows computer. If Windows won't start, you can use Spotmau PowerSuite to recover the system, restore the registry, repair the partition table, reinstall Windows and many other repair and recovery tasks.
Step 1: Insert Spotmau PowerSuite bootable CD
Just put Spotmau PowerSuite 2010 CD into your CD drive, and click start button to restart your computer.
Note: You don't need to go into your system setup (BIOS) to set CD-ROM drive as the first boot device.
Step 2: Recovery system
Spotmau PowerSuite 2010 could identify PC hardware and find CD drive automatically. The interface shows as below, click the Windows Recovery button.
Why recovery system?
Because of the Spyware, Malware, worms, viruses, Trojans, Adware, keystroke loggers some of your registry files, boot up files and some other important files that Windows must have ones are delete by these viruses. So, you should recovery the from back up files or Spotmau Powersuite. After recovery, you can re-boot your computer and you can enter into the System easily.
If you can't actually get anything to come up - by that I mean that you never even see the initial Windows logo, you can run the Windows Recovery from Spotmau PowerSuite 2010. It will gives a step-by-step overview of the process to recovery any Windows files. This also applies if you didn't install the recovery console beforehand.
Regardless of how you got there, the recovery console will allow you to copy files, undo a recent installation, or fix the master boot record should that have become corrupt. Spotmau PowerSuite also boot up computer if your computer won't boot up after malware removal.
Step 3: Select recover mode
In Windows Recovery dialog box, there are system recovery, registry recovery, DPT recovery, MBR recovery buttons, with one click you could recover Windows easily.
Recover all your lost system files to Windows from Spotmau PowerSuite 2010 bootalbe CD.
Option 1: Missed file recovery
Option 2: MBR recover/repair
OPtion 3: Registry Recovery
Option 4: Boot.ini/Windows Registry Editor
Option 5: More ways for Recoverying Windows
Step 4: Re-boot computer and finished
Having finished all the recovery settings, restart your PC, believe it will show you the meaning of complete. You will be able to enter the Windows system.
Spotmau Powersuite 2010 is designed to solve many Windows problems usually faced by us while reducing the burden of user’s as well as administrators. It is not a “miracle CD” but I can guarantee you that it will help you to fix and optimize the majority of computer errors that you may experience over time.
Now spend the least money but get the most functionality, you can set your heart at ease! Buy and download it immediately!
